Categories

AM-HLT Hydrostatic Level Transducers

AM-HLT Hydrostatic Level Transducers
  • Works with all fluids—clean water, waste water, non-aqueous, debris-filled
  • Unrivaled simplicity, ruggedness and price using pressure
  • ±0.25% accuracy
  • Direct 4-20 mA output
  • Pre-calibrated level ranges
  • Available with and without intrinsically safety barrier
  • Custom cable lengths up to 999 feet
  • Optional lightning/surge protection
  • Two years warranty

More details

L1

3 other products in the same category:

Hydrostatic Level transducers are simple, rugged and inexpensive level sensors with built-in 4-20 mA transmitters WIth an IP68 rating they are at home in everything from clean water to activated sludge and Class 1, Div 2 environments. Moreover we can customize every single sensor (included in the price) for the depth range you require.

For clean water the AM-HLT-0 features a recessed membrane that is protected from sharp objects and is the most economical sensor. For wastewater the AM-HLT-5 has a flush, rugged membrane to prevent fouling. For wastewater with lots of suspended solids (such as sludge) the AM-HLT-50 has a large membrane and a protective aluminum plate.

These sensors output a 4-20 mA signal so they only connect to a PLC or an inexpensive panel meter to work. They come with an aneroid bellows that keeps the inside of the sensor dry. For less than $100 list price you can add lighting protection that comes with a lifetime guarantee against lightning damage. You will not find a more cost effective method for measuring liquid depth.

Water Analytics and Aquametrix has been manufacturing state-of-the-art, durable and cost effective water quality analysis equipment for over 50 years. Aquametrix.ca and Industrial Technical Services are stocking distributors for Aquametrix and Water Analytics Products for Eastern Canada.

Water Analytics manufactures state of the art probes for pH, ORP, conductivity, dissolved oxygen and flow monitors, turbidity, chlorine meters, fluid transmitters and more. Water Analytics offers replacement products for Lisle-Metrix and GLI (Great Lakes Instruments)

Aquametrix products are used extensively in the following industries:

Municipal Water Treatment
Municipal Sewage Treatment
Industrial Water Treatment (Reverse Osmosis, De-ionization, Desalination)
Industrial Waste Water Processing
Plating
Food and Beverage Processing and Manufacturing
Pulp and Paper
Chemical Manufacturing
Mining
Fume Scrubbers

Aquametrix.ca and Industrial Technical Services are stocking distributors for Eastern Canada and also provide service for Aquametrix products

Newsletter